Lure Head 3D

J7W1 Shinden Restoration 3D Design Tips

The Patience

Posted by kikakuya on November 17, 2007

mwing1.gifAfter the mock-up is done, let’s insert it in between a body and a wing. The wing attached till yesterday is required to reduce by the overhang of a junction part. Since the wing has not been made into the polygon mesh yet, it can be shortened easily. Although we cannot cut the griddle instantly , resizing is the quick work of a CG no one but. The polygon of main wing will be making in the final stage, since it cannot predict what kind of correction occurs from now on. Well, let’s change the junction into a polygon and start fabrication instantly.

mwing2.gifThe method of a settlement that the curved surface concentrated to an engine cowling is peculiar to pusher type machine. Even if the degree of complexity of the mesh is set the lowest, it is quite tough work. The work which bends a polygon field little by little and is included into the body, looking at x-axis, y-axis, and z axis by turns. The work of this portion is the sheet metal store. Patience is required for this work. Don’t give up till it can be convinced to good polygon fabrication. It certainly leads a success. Japanese is here.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: